Carbon Brushes (36)

Page
Set Descending Direction

Carbon brushes are wear parts that, depending on use, may need to be replaced from time to time. We have the most common types of carbon brushes in the range.

In addition to dimensions, we often also refer to a brand and type. We do this because, in addition to the dimensions, the hardness of the carbon, the strength and length of the spring, and the model of the foot are also important. When the spring does not have enough force, or the foot is wrong, the carbon brush sometimes makes bad contact. When the carbon is too hard, the copper of the collector will wear out much faster. So pay attention to this and ask us for advice if necessary.

Do not forget to clean the carbon brush housing when replacing the carbon brush. This is to prevent the carbon brush from getting stuck by dirt. You can use our collector cleaners for this.

  1. Carbon brush Sterling Elite2             8,0 x 22,0 x 20,0mm.
    Carbon brush Sterling Elite2 8,0 x 22,0 x 20,0mm. K065.068
    Carbon brush Sterling Elite2 8,0 x 22,0 x 20,0mm.
    €14,16
    In stock
  2. Carbon brush Schmidt TR6/Logic              8,0 x 12,3 x 18,0mm.
    Carbon brush Schmidt TR6/Logic 8,0 x 12,3 x 18,0mm. K065.170
    Carbon brush Schmidt TR6/Logic 8,0 x 12,3 x 18,0mm.
    €25,78
    In stock
  3. Carbon brush Schmidt                     8,0 x 10,0 x 22,0mm.
    Carbon brush Schmidt 8,0 x 10,0 x 22,0mm. K065.165
    Carbon brush Schmidt 8,0 x 10,0 x 22,0mm.
    €16,09
    In stock
  4. Carbon brush TR6  CT6 motor  10,0 x 18,0 x 19,0mm.
    Carbon brush TR6 CT6 motor 10,0 x 18,0 x 19,0mm. K065.174
    Carbon brush TR6 CT6 motor 10,0 x 18,0 x 19,0mm.
    €32,11
    In stock
  5. Carbon brush cap for.Schmidt motor male thread
    Carbon brush cap for.Schmidt motor male thread K065.201
    Carbon brush cap for Schmidt motor male thread
    €22,57
    low stock
  6. Carbon brush Fortress/Sterling Calypso      7,0 x 11,0 x 16,0mm.
    Carbon brush Fortress/Sterling Calypso 7,0 x 11,0 x 16,0mm. K065.025
    Carbon brush Fortress/Sterling Calypso 7,0 x 11,0 x 16,0mm.
    €16,88
    low stock
  7. Carbon brush Alex                        7,9 x 12,3 x 16,0mm.
    Carbon brush Alex 7,9 x 12,3 x 16,0mm. K065.040
    Carbon brush Alex 7,9 x 12,3 x 16,0mm.
    €65,50
    Out of stock
  8. Carbon brush Alex        size. 5.0 x 12.3 x15mm.
    Carbon brush Alex size. 5.0 x 12.3 x15mm. K065.042
    Carbon brush Alex size. 5.0 x 12.3 x15mm.
    €46,47
    Medium stock
  9. Carbon brush CT3  4350 rpm              8,0 x 16,0 x 18,0mm.
    Carbon brush CT3 4350 rpm 8,0 x 16,0 x 18,0mm. K065.066
    Carbon brush CT3 4350 rpm 8,0 x 16,0 x 18,0mm.
    €28,67
    In stock
  10. Carbon brush CT3 motor 5300rpm           7,0 x 13,5 x 19,0mm.
    Carbon brush CT3 motor 5300rpm 7,0 x 13,5 x 19,0mm. K065.067
    Carbon brush CT3 motor 5300rpm 7,0 x 13,5 x 19,0mm.
    €40,12
    Out of stock

Carbon Brushes (36)

Page
Set Descending Direction
Copyright Warmerdam Revalidatie Service 2023