Carbon brushes are wear parts that, depending on use, may need to be replaced from time to time. We have the most common types of carbon brushes in the range.
In addition to dimensions, we often also refer to a brand and type. We do this because, in addition to the dimensions, the hardness of the carbon, the strength and length of the spring, and the model of the foot are also important. When the spring does not have enough force, or the foot is wrong, the carbon brush sometimes makes bad contact. When the carbon is too hard, the copper of the collector will wear out much faster. So pay attention to this and ask us for advice if necessary.
Do not forget to clean the carbon brush housing when replacing the carbon brush. This is to prevent the carbon brush from getting stuck by dirt. You can use our collector cleaners for this.
- Carbon brush Sterling Elite2 8,0 x 22,0 x 20,0mm. K065.068Carbon brush Sterling Elite2 8,0 x 22,0 x 20,0mm.€14,16In stock
- Carbon brush CT3 4350 rpm 8,0 x 16,0 x 18,0mm. K065.066Carbon brush CT3 4350 rpm 8,0 x 16,0 x 18,0mm.€28,67In stock
- Carbon brush CT3 motor 5300rpm 7,0 x 13,5 x 19,0mm. K065.067Carbon brush CT3 motor 5300rpm 7,0 x 13,5 x 19,0mm.€40,12Out of stock
- Carbon brush Sterling XS CT4 8,0 x 16,0 x 18,0mm. K065.064Carbon brush Sterling XS CT4 8,0 x 16,0 x 18,0mm.€24,47In stock
- Carbon brush Bec-Sterling 6,35 x 12,7 x 22,0mm. K065.060Carbon brush Bec-Sterling 6,35 x 12,7 x 22,0mm.€12,51In stock
- Carbon brush Bec-Sterling 2000 6,3 x 11,0 x 20,0mm. K065.062Carbon brush Bec-Sterling 2000 6,3 x 11,0 x 20,0mm.€16,09In stock