Dynamic DX-REM48 REV C Master Remote refurbished

The Dynamic DX-REM48 REV C is a Master Remote for power wheelchairs equipped with a Dynamic DX control system. Together with a DX power module, such as the DX-PMB, this controller forms the basis of the user interface within the modular Dynamic DX system.

The DX-REM48 is the standard version within the REM48 series. Unlike the DX-REM48A Plus version, this model does not have connections for external switches.

The REV C version is the improved generation of the DX-REM48. With enhanced hardware capabilities and increased internal memory, this version offers more possibilities for configuration and programming compared with older REV A models.

♻️ Refurbished quality

Refurbished modules receive a second life with us. Before a module is supplied again, it is technically inspected and reconditioned where required.

We check, among other things, the operation of the joystick, keypad, charging connector and the overall condition of the module. We also verify that the version and internal configuration correspond with the type being supplied.

This ensures you receive an original Dynamic component that is suitable for reliable reuse.

Because refurbished modules have previously been used, the housing may show minor signs of use or cosmetic marks from its previous service life. The technical condition is our primary focus.

REV C version

The DX-REM48 REV C is the later version within the DX-REM48 series. Compared with the older REV A version, this version offers improved hardware and more programming options.

A REV C Master Remote can be used as a replacement for an older REV A version.

For power wheelchairs with multiple electric functions or more complex configurations, a REV C version may be required due to its extended programming capabilities.

Controls and functions

The Dynamic DX-REM48 REV C features:

• 16-button control via keypad;
• LED indicators for the different functions;
• LED battery indicator;
• connection for the joystick module.

The controller provides the user with direct access to the main functions of the power wheelchair.

The DX-REM48 REV C does not have connections for external switches. For this purpose, the DX-REM48A Plus version is available.

Programming and replacement

The DX-REM48 REV C Master Remote is part of a complete Dynamic DX wheelchair control system. After replacement, the module must be programmed for the specific power wheelchair.

The settings from the original controller can often be transferred and programmed into the replacement Master Remote.

We can assist with this process if the original controller is sent to us.

If programming in advance is required, we need information such as:

• front-wheel or rear-wheel drive;
• maximum wheelchair speed;
• available electric functions, such as:
  • backrest adjustment;
  • tilt adjustment;
  • seat lift;
  • leg rest adjustment.

Full programming and configuration require Dynamic Wizard software. This software is intended for dealers and specialised technical service providers and is not available for private users.

Compatibility

The Dynamic DX-REM48 was widely used on power wheelchairs equipped with Dynamic DX control systems.

This Master Remote was used on various models from the Puma series, including:

• Puma;
• Puma 20;
• Puma 40.

Actual compatibility depends on the complete wheelchair configuration and the installed Dynamic DX modules.

Stock and availability

Refurbished Dynamic DX-REM48 REV C Master Remotes depend on the availability of suitable original modules.

Our refurbished stock changes continuously. If a specific version is temporarily unavailable, we cannot indicate in advance when it will become available again.

Availability depends on the possibility of obtaining suitable modules from the market.

Delivery

• Dynamic DX-REM48 REV C Master Remote refurbished
• Original Dynamic Controls component
• Technically inspected and reconditioned
• 1-year warranty